Long life

it can be cleaned.

High concealment

Easy to apply Permoplast Plastic Interior Wall Paint is a water-based, acrylic emulsion-based, decorative, matte, top coat interior wall paint

Excellent adhesion to all kinds of surfaces, high covering power

does not crack, blister and spill

It can be applied on all kinds of interior structural elements whose preparations have been completed before painting

It allows the wall to breathe with its inhalation feature

Permoplast Plastic Interior Wall Paint gives a matte decorative appearance to the surfaces to which it is applied

It is very easy to apply, does not show brush and roller marks, hides plaster errors

It is an odorless, non-yellowing paint with superior properties

SURFACE PREPARATION Newly plastered surfaces: Surfaces should be reviewed and all layers that cannot support themselves should be cleaned and removed, and free sand, dust and oil should be removed from factors that will reduce adhesion strength.

The application surfaces must be completely dry

For this reason, newly plastered surfaces should be kept for at least 20 days to set the plaster

Cracks, pits or fractures, if any, on the surfaces should be corrected with Permolite Permomacun Water Based Super Acrylic Interior Wall Paste

The mold release oils used in gross concrete must be absolutely cleaned

Old painted surfaces: All layers that cannot bear themselves should be cleaned and removed.

Level differences that may occur should be corrected by pasting with Permolit Permomacun Water Based Super Acrylic Interior Wall Paste

Ensure that the surface is clean, solid, dry and free of dust before application

Priming: It is recommended to apply a single coat of Permolite Permobinder or Permoten Satin Gypsum Primer to plaster surfaces such as Permolite Permolite Water Based Acrylic Primer or Permolite Permosar Silicone Primer, gypsum and paste to ensure the adhesion of free micronized powders on surfaces whose surface preparation has been completed and to increase adherence.

If it is desired to make a color change on old painted solid surfaces, a single layer of primer should be made with one of the Permolite Permocapar Covering Primers

It is necessary to wait at least 6 hours for the primer to dry before starting the topcoat application

Thinning: Approximately 10% by volume using water

It should be thinned by 15

Application: The topcoat is applied to the surface ready for application with at least 2 coats with a brush, roller or pistole

Wait 4 to 6 hours between coats

All vehicles used can be cleaned with water