Interior wall paint with permolite permosile silicone 20 kg Interior wall paint with permosile silicone complies with interior wall paint with permosile silicone 5808.

Interior paint with permosil silicone

water-based, acrylic copolymer emulsion-based, silicone-added, decorative, matte, wipeable, topcoat interior paint.

It can be applied on all kinds of interior structural elements whose preparations have been completed before painting.

Thanks to the silicone and special additives in its structure, it allows the wall to breathe as it has water-repellent properties and high vapor permeability and is used safely in humid environments.

It adheres perfectly to all kinds of surfaces, its covering power is high, it does not crack, blister and spill.

It gives a matte decorative appearance to the surfaces to which it is applied.

It is very easy to apply, does not show brush and roll marks, and hides plaster errors.

It is an odorless, non-yellowing paint.

Permosilicone interior paint specifications appearance : Matte, flat-looking, interior paint.

Color : Timesheet colors viscosity : 126 ± 5 ku/25oc density : 1.58 ± 0.15 g/cm3 (depends on color.

) solid matter : 65 ± 2 (120oc 30 min) pH : 8.5 ± 1 consumption amount : Controlled sample work is recommended for 7 – 9 m2/kg (11 – 15 m2/l) final consumption on a single layer depending on surface conditions.

Drying time : Touch drying 30 min (23oc 50% hr) full drying 24 hours waiting time between coats 4 – 6 hours flash point : – (does not shine) packaging type : 20 kg (12.2 l) – 10 kg (6.1 l) – 3.5 kg (2.1 l) – 1 kg (0.6 l).

How to prepare before painting? New plastered surfaces: All layers that cannot carry themselves should be cleaned and removed by reviewing the surfaces, and free sand, dust and oil should be removed from factors that will reduce the adhesion strength.

The application surfaces have to be completely dry.

For this reason, newly plastered surfaces should be waited for at least 20 days for the plaster to set.

Cracks, pits or fractures, if any, on the surfaces should be corrected with the water-based super acrylic interior wall paste of permolite permomac.

The mold release oils used in gross concrete have to be absolutely cleaned.

Old painted surfaces: All layers that cannot carry themselves have to be cleaned and removed.

Level differences that may occur have to be corrected by pasting permolite permomac with water-based super acrylic interior wall paste.

Before starting the application, it has to be checked that the surface is clean, solid, dry and dust-free.

Priming: In order to ensure the adhesion of free micronized powders on surfaces with completed surface preparation and to increase adherence, it is recommended to apply permolite permolate water-based acrylic primer or permolite permosar silicone primer on plaster surfaces, and permolite permobinder or permotene satin gypsum primer on highly absorbent surfaces such as gypsum and paste.

If it is desired to make a color change on old painted solid surfaces, a single layer of primer has to be made with one of the permolite permocapar cover primers.

It is necessary to wait at least 6 hours for the primer to dry before starting the topcoat application.

Thinning: It should be thinned by 10-15% by volume with water. How should the interior wall paint with permosilicone be applied? The topcoat is applied to the surface, which is ready for application, as at least 2 coats with a brush, roller or pistole.

Wait 4-6 hours between coats.

All vehicles used can be cleaned with water.

none when color is made