Bianca Stella Metallic Silver 0.25 Lt surfaces TO BE APPLIED Bianca Stella (Wood and Metal Colors) can be applied on all kinds of surfaces such as wood, furniture, parquet, laminate, ceramic, tile, marble, glass, plastic, metal, aluminum, galvanized, zinc, porcelain, wall, stone, paper, cardboard.

PROPERTIES• Coverage is very high.

It has excellent water resistance.

Since its water resistance is very good, it also provides waterproofing on the surface where it is applied.

It has high chemical resistance (soap, dishwashing detergent, shampoo, etc.).

Since it is very good to spread, it does not leave any brush and roller marks, and gives the user the desired time for the necessary corrections.

It has high adhesive strength, it does not require any primer.

Dirt and stain resistant, it is cleaned very easily with a wet and soapy cloth.

Perfumed, no unpleasant odour.

Suitable for use in all indoor and outdoor spaces.

APPLICATIONPreparation before application: The application surface must be clean.

The surface has to be free from all factors that will reduce the adhesion of the paint to the surface such as all dust, dirt, oil.

Stella Water Based Pure Acrylic Paint is applied to the required pre-prepared surface in 2 layers without thinning, with a silk brush, silk roller, mohair roller or spraying.

Min. between floors.

It should be waited for 2 hours.

Stella Wood Paint Application: With Bianca Stella Water Based Pure Acrylic Paint, pour the amount of Stella wood paint you need to use into an empty container and add the same amount of water and mix until it becomes homogeneous.

Always apply in one direction and as a single layer, always staying in the same plane with the help of a shortcut brush or sponge.

If you want to protect the applied floor, you can apply Stella Water-Based Liquid Glass or Vetro Liquid Glass on it.

During the application, care has to be taken to ensure that the applied surface and ambient temperature is between +5°C and +30°C.

Depending on the application method and the floor, an area of 4 – 5 m ² can be dyed in one layer with a dyeable area of 0.25 liters, and an area of 8-10 m² can be dyed in one layer by thinning it one to one with water.