It is a new generation of water-based, pure acrylic-based conversion paint with excellent adhesion to all surfaces

SURFACES TO BE APPLIED Applicable to all kinds of wood, furniture, parquet, laminate, ceramic, porcelain, tile, marble, glass, plastic, metal, aluminum, galvanized, zinc, stone, wall, paper, etc.

PROPERTIES • Very high coverage

It has excellent water resistance, so it also provides waterproofing on the surface where it is applied

Has high chemical resistance (soap, cleaning detergent, diluted bleach, etc.)

It does not leave brush and roll marks because it is very good to spread, it gives the user the desired time for the necessary corrections

It does not require any additional varnish application thanks to the glossy appearance it leaves after application

It has high adhesive strength, it does not require any primer

Dirt and stain resistant, very easy to clean with wet and soapy cloth

Perfumed, no unpleasant smell

Since it has high resistance to water and chemicals, it does not require additional protective varnish application (except in places where contact with water is high and on the floor)

Suitable for use in all indoor and outdoor spaces

APPLICATION THE APPLICATION surface must be clean

The surface should be free of all factors that will reduce the adhesion of the paint to the surface, such as all dust, dirt, oil and silicone, and sanding should be done when necessary

Does not require the use of any primer before application

It is recommended to prime the surface with Bianca Antirust to prevent corrosion on metal surfaces

After opening the Bianca Stella package, it is mixed until a homogeneous consistency is obtained

It is applied to the required pre-prepared surface in 2 layers without thinning the product, with a silk brush, velvet roller or spraying

Min between floors

2 hours have to be waited

During the application, care should be taken to ensure that the applied surface and ambient temperature is between +5°C and +30°C