-
Product Description Ferrous and non-ferrous metals are used as a corrosion-resistant and decorative coating in wood and some plastics.
-
Application Description Suitable for applications in small areas.
-
Stir before use.
-
To obtain corrosion resistance, apply the product to bare or rusty metal in 2 layers.
-
Do not apply too much paint to the surface to prevent sagging in coat applications.
-
Make sure that the corners and edges are coated properly, the corners and edges are the points with the highest risk of premature rusting.
-
Roll: Suitable for flat large area applications.
-
Hammerite is ready to use.
-
Hammerite can be thinned for easier dyeing in roll applications.
-
9 parts Hammerite 1 part Brush Cleaner or Synthetic Thinner can be thinned.
-
Painting has to be started from the flanges, the remaining areas have to be painted quickly.
-
Apply briefly and quickly for the best result.
-
Spray: Suitable for large areas.
-
All colors of Hammerite Hammered product contain silicone.
-
Air Spray: Thin Hammerite by 15% with Hammerite Brush Cleaner and Thinner.
-
Set the spray gun to 25/35 psi (approx. 2 Bar).
-
Apply 3-4 thin coats by waiting one hour between coats.
-
1 thick coat can be applied to achieve a glossy finish on the top coat
-
but attention should be paid to flowing and sagging.
-
Airless Spray: If necessary, Hamerite can be thinned with 15% Hammerite Brush Cleaner and Thinners.
-
Nozzle Pressure: 2500-3000 psi (approx.
-
~170 bar
-
Nozzle diameter: 375-500 microns/0.015 - 0.020. Apply by waiting 2 hours between coats or 2-3 coats after touch drying is completed.
-
For Air spray and Airless spray: Mix the paint in the reservoir before or during use to obtain a balanced color.
-
For best results, use only Hammerite Brush Cleaner and Thinners.
-
Drying Time 4 hours Drying time may be prolonged at high relative humidity and low temperature.
-
Product Features Resistant to all kinds of weather conditions.
-
Long life
-
High concealment.








