Produced in GENERAL ISO 9001:2015 quality management system standards, TSE certified.

Bunk bed is manufactured from CR-ST 12 quality 1 mm thick metal profiles.

The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion, fading or rusting.

The product is completely demounted.

With the special allen screw threading system, it can be easily installed without using any additional tools or connection systems.

Bed frame durability increases with Allen screw system

negativities such as shaking, sound, squeaking are not experienced.

1 half-length railing and 1 full-length railing are included in the product.

In case extra guardrail is requested

must be ordered separately for the additional guardrail.

The product has a 2-year warranty.

In case of loss, deformation or user-induced error of the product part, Argimo provides equipment support for 10 years and parts can be supplied for a fee.

TECHNICAL DETAIL The height of the bed from the ground is 28 cm.

Bed slot depth is 6 cm.

Suitable for all beds.

The appropriate bed size for the bunk bed is the bunk bed size.

Bed is not included in the product.

The outer size of the bunk bed is 10 cm more than the size you have taken.

(Example: The outer size of the product taken as 90x190 cm is 100x200 cm.

) Carrying capacity lower floor min.

250 kg upper floor min.

150 kg.

There are a total of 20 profile laths in 10 lower and 10 upper floors as a bunk bed platform.

There are 6 T-support legs in the bunk bed lower bed that increase durability.

The bunk bed is 77 cm between two floors.

ADVANTAGE Can be used as under bed stacking area and easy to clean.

With its high carrying capacity, it can be used by children, young people and adults of all ages.

It can be easily installed.

PACKAGING – TRANSPORTATION The product is delivered in a single box.

BC wave dopel cardboard box and its inside is supported by styrofoam and bubble wrap nylon.

The outside of the box is packed with shrink nylon.

(Packaging boxes are barcoded.

) Our products are delivered disassembled with free shipping.

After receiving the product, cargo, etc.

If there are damaged/missing parts due to welding, when the parts are determined from the installation diagram and forwarded to our customer representative, the damaged/missing part is sent to you free of charge.

INSTALLATION CAUTION: All screws must be fastened by hand before product installation, all screws must be tightened with wrench after product installation is completed.

Installation manual is included in the package.

Equipment and bunk apparatus required for installation are included in the box.

Installation belongs to the customer.

You can ask our technical team for support for the installation.