FLOSOFT FOAM DISPENSER WITH LID 500 ML Description Foam Soap Machine with chamber Install as described.

a) STICKING WITH TAPE: After removing the colored strips on the adhesive tapes behind the mounting plate, stick the plate to the wall.

Make sure that the floor to be glued is clean, oil-free and dry.

Before bonding in cold weather, heat the tile with a dryer.

Our company prefers world-famous tesa and 3M tapes in its products.

You can glue it safely without screws.

Note: For the strength of the adhesive, please fill the liquid 3 hours after gluing.

b) OPTIONAL SCREWING: Mark the drill holes that fix the mounting plate with a pencil by leaning the plate against the wall.

(Prefer between two tiles.) Drill the places you marked with a 6 mm concrete drill bit approximately 4 cm.

After attaching the dowels to the holes, mount the plate to the screws.

You can fill any amount of foam liquid in your first and only fillable, more economical, self-storage product in Turkey and get as much foam as you want.

IMPORTANT NOTE: Please do not put liquid soap.

Use foam liquid.

If you are going to use foam liquid soap of different brands, rinse the chamber thoroughly by circulating with plenty of water every time.