Dryfixnm-S 10 moisture dye

It is a new generation moisture dye produced by modifying special chemicals with polymer, forming a layer to moisture and dampness. It is applied to all kinds of wet and humid interior-exteriorwalls and ceiling and provides a definite solution against moisture and dampness formation. Application areas Wet and humid interior and exterior walls and ceilings, painted and unpainted surfaces, plaster, gypsum, concrete, screed, etc. On surfaces and floors, floodplains, tunnels. Characteristics Eliminates moisture and dampness problems. It can be applied directly to a damp surface. It eliminates bad odors caused by humidity. It is not affected by salt water and salt vomiting. It has high adhesion strength to all kinds of surfaces. It is not affected by UV, rain and water. It is ready to use. Application instructions If there are raised parts on painted surfaces, they should be cleaned. Dryfix nm-S 10 (moisture and damp dye) is a ready-to-use product. It does not require priming and thinning. Before starting the application, the product cover should be opened and mixed for 2-3 minutes. After the mixing process is completed, Tryfix nm-S 10 is applied to the surface to be applied with a brush, roller or a suitable sprayer. After the first coat is applied, it should be waited for 8 hours for the second coat application. After the application is completed, the environment must be ventilated. Consumption 500 g/m2