-
the right OF withdrawal IS excluded from the SCOPE OF the RIGHT OF WITHDRAWAL (according TO the article "products specially produced FOR the ORDER and prepared BY modification OR addition") for which this PRODUCT IS specially prepared for the order from the machine.
-
It is not possible to return and exchange.
-
Elastomeric acrylic copolymer is a resin-based, water-based, single-component, ready-to-use, elastic, white colored (paintable) sliding waterproofing material that can be easily applied to all kinds of floors.
-
It can be used indoors and outdoors, horizontally and vertically, on flat and inclined roofs, terraces, balconies, pools and water tanks, gutters, eaves and chimney edges, surfaces such as concrete, plaster, brick, zinc, galvanized, briquette.
-
It is ready to use.
-
It is very easy to apply and has semi-fluid feature.
-
Therefore, it can easily cover very difficult surfaces.
-
Labor cost is low.
-
It is elastic.
-
1 to 1.5 mm.
-
shows 600% elongation after 24 hours at 23°C in thickness.
-
Provides excellent adhesion to all kinds of building materials.
-
(Adhesion strength on mineral-based surfaces: 7.15 kgf /cm 2 ).
-
Preserves its elasticity in hot and cold differences.
-
(476% at 70°C, 397% at -17°C).
-
Resistant to weak chemicals.
-
Provides respiration on surfaces.
-
(Water vapor permeability: 27.6 g/m² day at 65% humidity at 23°C after 24 hours).
-
Tensile strength
-
24.5 kgf / cm 2 at 23°C after 24 hours, 55 kgf / cm 2 after 72 hours.
-
Solvent-free.
-
It is decorative.
-
As white is produced, it can be colored with Ars tubes (only 4-5 shades) or painted with only water-based paint with the same elasticity.
-
Applied surface
-
for each coat depending on its structure, roughness and porosity
-
0.750-1 kg/m² in the average vertical and 1-1.5 kg/m² in the horizontal.
-
Consumptions given are approximate values and
-
since there will be differences according to the pore and gap structure of the surface, the exact consumption will be determined at the end of the work.


