FLEXDUB DOMESTIC WATER LEAKAGE REPAIR CHEMICAL This product is used in drinking water and domestic water installations in buildings daily 300 Lt

repairs water leaks up to and removes cracks, joint leaks of all types of pipes ( IRON, PPRC PVC, GALVANIZED, COPPER )

It is not affected by the pressure and temperatures in the installation

Since our product does not leave residues that will harm human health after application, it can be used without any action after system bluffing

How is FLEXDUB Domestic Water Leakage Repair Chemical Applied ? This product should be used by diluting it by ¼

In domestic water applications, installing a circulation system to better reach the leakage of particles, especially in PVC pipe leaks, heating the system during application will provide a faster and permanent solution

The process should be continued for about 12 hours

During the application, the inlet valves of all filtered devices (dishwasher, washing machine, combi boiler , water heater) should be closed or separated from the system

During the application, it has to be ensured that circulation is made from the leakage area or the entire system.

By taps to the system

It should be connected to each other by making a pass and a closed circuit should be created to circulate

Then, with the help of a water pump, the product should be given to the system in a diluted 1/4 ratio and circulated

The circulation system can also be provided with plumbing cleaning machines for professionals

the system must be circulated 12/24 hours under pressure

During the application, all outlets connected to the installation have to be closed ( taps, siphon v

b ) water outlet should not be allowed in any way

During the application, the area will be closed to water use for 12/24 hours

After application, the circulation pump is disconnected from the system

All taps are opened, the chemical in the system is discharged with mains pressure

Trace amount of remaining chemical does not pose a problem in terms of health

In cases where there is no circulation pump, the system should be pressurized by pressing chemical water into the system with a hand pump and reinforcing as the system pressure decreases

However, the circulation pump application should always be the first choice method both in terms of success and renovation quality

Our product is manufactured as a concentrate to put 1 liter of chemical in 20 liters of water

You can determine how much product you need by proportioning to the amount of water in your system

If the height of the leak is at serious levels, you can reach us and get technical support

OUR PRODUCTS ARE COMPLETELY DOMESTIC PRODUCTION

MADE IN TURKEY