-
Hydrolux Gloss Paint for Wood, Metal and Wall Surfaces [264-] DESCRIPTION: Acrylic emulsion based, glossy, topcoat paint used for decorative purposes.
-
Properties: Odorless, friendly to human health and the environment, resistant to wiping with water, covering, non-yellowing, resistant to impact and scratches.
-
APPLICATION AREA : It is used as a top coat paint on wood, metal and mineral surfaces after appropriate surface preparation.
-
METHOD OF APPLICATION: Surface Preparation: On surfaces to be newly painted
-
After the knots are burned on the wooden surfaces to be newly painted and saturated with Pinosan Decorative Wood Preservative, the surface should be primed with Dyo Primer Paint or Dyo Kivastar when Super Putty is used to eliminate surface defects, and with Dyobinder when Acrosuper Putty is used.
-
Metal surfaces should be primed with Dyo Antirust after cleaning from all kinds of dirt, rust and oil.
-
In order to obtain a smooth, uniform surface on mineral surfaces, the surface should be primed with Dyobinder after applying Dyorit Paste.
-
“Insulation primers should never be used in the priming process”.
-
On old painted surfaces
-
the surface has to be cleaned from all kinds of oil, dirt, loose and swollen layers.
-
Dyobinder is applied to the entire surface after surface smoothing with Dyorit Paste or powder pastes where necessary.
-
On old synthetic painted surfaces
-
After the surface is lightly sanded and the sanding powders are removed from the surface, the Dyo Pass Primer is applied as a single coat.
-
Painting: It is applied in 2 layers with a brush or roller without thinning 24 hours after primer application.
-
In order to obtain a proper application, one-way scanning has to be performed and excessive scanning has to be avoided.
-
It is recommended to wait at least 6 hours between coats.
-
colorable AREA : Depending on the surface, an area of 14-16 m2 with 1 L and an area of 11-13 m2 with 1 kg is painted on a single layer.



