-
Sista Silicone 280ml - Transparent Product Features It is used in working joints, for filling, insulation and bonding in door-window (wood, metal, PVC) intervals, in the installation of insulating glass, in the manufacture and installation of shower cabinets, in the installation of glass showcases, in the joints of tiles in bathrooms and kitchens that may be exposed to water, in all kinds of flange joints as cloth-free gasket material, in the joints of all building elements that may be exposed to work due to factors such as heat and moisture.
-
Product Advantages Single component.
-
It is solvent-free, does not crack, does not lose volume.
-
Resistant to aging and UV rays.
-
It is antibacterial, does not cause mold and yellowing.
-
Indurates with moisture.
-
Maintains its permanent elasticity.
-
Technical Specifications 280ml Density : 1.02 g/ml Operating temperature : 4°C to 40°C Shelling time : 10 min at normal room temperature Intermediate curing time : 1.5 mm / day Shore A hardness : 25 Elongation rate at break: 530% Tensile strength : 2.3 MPa Heat resistance : -55°C to 200°C Continuous flexibility : 25% (DIN 52451) Max.
-
Filling interval : 30 mm Thermal insulation quality : 0.17 W/km (DIN 53612) Shelf life : 12 months in a cool and dry environment Application Filling intervals should be clean, dry, free from oil and dust.
-
If any, previously used filling material residues, foreign materials that prevent adhesion have to be cleaned and blistered paints have to be scraped.
-
In cartridges : To make the filling smooth, tape on both sides.
-
Cut the mouth of the cartridge, insert the plastic cannula and cut the tip horizontally according to the joint.
-
After squeezing the silicone with the Sista Cartridge Gun, the surface can be corrected by pressing it with a water-soaked spatula with detergent or a similar apparatus.
-
In tubes: The protective foil at the end of the tube is punctured using the reverse of the tube cap.
-
The cannula tip is cut at a 45° angle at the desired thickness.
-
The cannula is inserted into the tube end and the product is applied.
-
Instruments can be cleaned with alcohol.


