DEFINITION and SPECIFICATIONSPrepared Repair Filler

It is a ready-to-use filler and surface correction paste based on modified acrylic copolymer binder, flexible structure, ready to use indoors and outdoors, prepared to cover cracks, holes and roughness in walls and floors.

It is used as a general purpose filling especially in the repair of cracks and holes in mineral-based surfaces such as wall or floor gypsum board, plaster, brick, gas concrete on exterior facades.

The resulting surface is smooth and matte.

Easy to apply, dries quickly.

It can be painted over.

Resistant to moisture and water after complete drying.

Does not crack or collapse.

Sanding can be done on it.

APPLICATIONFor application, the floor or surfaces must be dry and clean.

Apply the ready-made repair filling with a spatula or steel trowel.

Surface and air temperature should be + 5° - +30°C during application.

Do not apply more than 10 mm thick on a single layer.

Apply two coats when necessary and wait at least 24 hours between coats.