this PRODUCT has been SPECIALLY PREPARED FOR the ORDER from the machine ( "

Products specially produced for the order and prepared by making changes or additions to it "

Article) is excluded from the SCOPE OF THE RIGHT OF WITHDRAWAL.

It is not possible to return and exchange.

5 kg: 8 - 10 m² /tin box COLOR: Off-white It is a very strong insulation paint produced by modifying with special chemicals and polymers to eliminate moisture and humidity problems caused by natural conditions on the interior and exterior walls of buildings.

It can be applied to all kinds of wet, damp or dry walls, painted and unpainted surfaces.

Thanks to its excellent alkaline and mold resistance, it prevents the formation of mold and moisture on the walls and destroys them, if any.

Its adhesion resistance to all kinds of surfaces is extremely strong, it never gets up, does not blister, and its resistance to chemicals is quite good.

It is not affected by UV and rain, water and salt.

It is used in interior and exterior walls, sub-basements of buildings, basements, garages or cellars, interior walls facing north and in areas where there is a lot of moisture and humidity.

Creates a film that shows excellent water resistance on the surface where it is used.

Paint or wall clings very tightly to the surface, even if it is damp or wet, dries quickly and provides insulation.

It is not affected by salt water and salt vomiting.

Due to this feature, it is also used to solve the problem of paint blistering in the sub-bases of the buildings.

ISONEM MS 82 moisture paint forms a waterproof on the surface where it is applied, while at the same time it penetrates the wall and dries the moisture inside thanks to its special chemicals.

In this way, it provides drying inside the wall where it is applied.

ISONEM MS 82 moisture dye has no side effects.

Therefore, it does not cause any chemical damage to the surface or materials to be applied.

Wet and damp, on walls,painted or unpainted damp walls,sub-basements, interior and exterior walls,basement walls, surfaces such as plaster, gypsum, concrete, screed and floors,tunnels, northern facades of buildings, walls with mold and fungus, etc.

in many dampness and humidity problems.

ISONEM MS 82 moisture paint is ready for use and does not require primer.

The application surface may be wet, damp, damp, moldy, mushroomy or dry.

It can be applied to all kinds of painted and unpainted surfaces.

If there are raised parts only on painted surfaces, they have to be cleaned.

The ISONEM MS 82 cover in its original packaging should be opened and mixed thoroughly for 3 minutes.

After the mixing process is completed, the first coat should be applied to the existing surface with the help of a brush and roller.

After the first coat, it should be waited for 24 hours and the second coat should be applied.

Ventilation of the application areas must be done well, masks, gloves and protective goggles must be used during the application.