-
Repair Kit Adhesive Usage The use of the repair kit adhesive is described in detail in the instructions for use sent with the product. Briefly, the repair process will be carried out as follows: · If the damaged area is wet, you need to clean it with a dry towel. · You should apply the repair liquid in a thin layer to the damaged area with the help of a stick. · After waiting for 10 hours in this way, you should check the strength of the armbands by inflating them. · After making sure your product is airtight, you can start using it again. With repair kit adhesive, your armband will be ready to use for 10 to 12 hours. In this way, you can continue to use it again without paying for a new law enforcement. If the damage to your arm is deep, it is possible to repeat the procedure several times to the damaged area. REPAIR KIT Myminibabycuffs low air
-
make sure the damaged area is clean, dry and free of oil. Apply the repair liquid in a thin layer to the damaged area with the help of the stick from the package. Let it dry for about 10 hours. After 10 hours, inflate the armbands fully (until the stitch marks disappear) and check if they are leaking air. You can use it again after making sure that the Myminibabykolluks do not leak air. You can repeat these procedures several times until the damaged area is sealed. The chemical reaction between the repair fluid and the PVC foil of the armrest may differ depending on the depth of the damage.


