Interior Wall Paint with Permosilicon Permosilicon interior wall paint complies with 5808.

Permosil Silicone Interior Wall Paint is a water-based, acrylic copolymer emulsion-based, silicone-added, decorative, matte, erasable, topcoat interior wall paint.

It can be applied on all kinds of interior structural elements whose preparations have been completed before painting.

Thanks to the silicone and special additives in its structure, it allows the wall to breathe as it has water-repellent properties and high vapor permeability and is used safely in humid environments.

It adheres perfectly to all kinds of surfaces, its covering power is high, it does not crack, blister and spill.

It gives a matte decorative appearance to the surfaces to which it is applied.

It is very easy to apply, does not show brush and roll marks, and hides plaster errors.

It is an odorless, non-yellowing paint.

Permosil Silicone Interior Wall Paint Technical Specifications Appearance : Matte, flat-looking, interior wall paint.

Color : Chart colors Viscosity : 126 ± 5 KU/25oC Density : 1.58 ± 0.15 g/cm3 (depends on color.

) Solid Substance : 65 ± 2 (120oC 30 min) pH : 8.5 ± 1 Consumption Amount : Depending on the surface conditions, controlled sample work is recommended for 7 – 9 m2/kg (11 – 15 m2/L) Exact consumption on a single layer.

Drying Time : Touch drying 30 min (23oC 50% HR) Full drying 24 hours Waiting time between coats 4 – 6 hours Flash Point : – (Does not shine) Packaging Type : 20 kg (12.2 L) – 10 kg (6.1 L) – 3.5 kg (2.1 L) – 1 kg (0.6 L).

How to Prepare Before Painting? New plastered surfaces: All layers that cannot carry themselves should be cleaned and removed by reviewing the surfaces, and free sand, dust and oil should be removed from factors that will reduce the adhesion strength.

The application surfaces have to be completely dry.

For this reason, newly plastered surfaces should be waited for at least 20 days for the plaster to set.

Cracks, pits or fractures, if any, on the surfaces should be corrected with Permolite Permomacun Water-Based Super Acrylic Interior Wall Paste.

The mold release oils used in gross concrete have to be absolutely cleaned.

Old painted surfaces: All layers that cannot carry themselves have to be cleaned and removed.

Level differences that may occur should be corrected by pasting with Permolit Permomacun Water Based Super Acrylic Interior Wall Paste.

Before starting the application, it has to be checked that the surface is clean, solid, dry and dust-free.

Priming: It is recommended to apply a single coat of Permolite Permobinder or Permoten Satin Gypsum Primer to plaster surfaces such as Permolite Permolite Water Based Acrylic Primer or Permolite Permosar Silicone Primer, gypsum and paste to ensure the adhesion of free micronized powders on surfaces whose surface preparation has been completed and to increase adherence.

If it is desired to make a color change on old painted solid surfaces, a single layer of primer should be made with one of the Permolite Permocapar Covering Primers.

It is necessary to wait at least 6 hours for the primer to dry before starting the topcoat application.

Thinning: It should be thinned by 10-15% by volume with water. How should Permosil Silicone Interior Wall Paint be applied? The topcoat is applied to the surface, which is ready for application, as at least 2 coats with a brush, roller or pistole.

Wait 4-6 hours between coats.

All vehicles used can be cleaned with water.