Our product is 80 Watts.

The brazing arm is made of PVC material with high strength and good heat resistance.

Ceramic resistance, long life, fast heating, has excellent temperature control.

Stainless steel coating has fast heat dissipation ability.

With its small size, it is lightweight and ergonomic, suitable for long-term use.

There is no sleep mode.

TEMPERATURE SETTING OPERATION: When you press the red "+" button, the temperature will increase by 1 degree, when you long press the "+" button, the temperature will increase continuously.

Press the white "-" key to decrease the temperature by 1 degree, long press the "-" key to decrease the temperature continuously.

When the button is not pressed for 3 seconds, the newly set temperature will be memorized and the temperature will be maintained the next time.

When the symbol "° F" or "° C" flashes, it means that the heating core temperature setting is not achieved, when the heater reaches a constant temperature of about 30-50 seconds, the solder tip temperature reaches the set value.

To prevent damage to the soldering iron, do not hit or shake the device in a way that can be damaged.

Do not shake to remove solder residue from the soldering iron tip.

This will cause the ceramic resistor to break, which is out of warranty.

You can easily buy spare resistors from our stores and replace them in case of life.

Unplug the electrical connection when not in use for a long time.

If you need to replace the components, the process should be continued by disconnecting the power.

In case of operation on the electronic card, disconnect the power of the card and make sure that the capacitor loads in the circuit are discharged.

Otherwise, the reverse current will disrupt the card of your air cooler.

This is a user error and is not covered by the warranty.