8 radiator backing 100x50 cm dimensions 3 mm thickness Metallized reflective surface Sizing with the help of scissors Practical Fixing Foil Coated Polyethylene Sponge Thermal Insulation Board Thanks to aluminum foil, the temperature is restored to the environment.

Heating Core Radiator gives four-way heat because it consists of two intermittent plates with hot water channels inside.

In one aspect, it heats the continuously cooling wall and does not give heat to the room.

This leads to 25% heat loss.

Since the heater honeycomb backing is produced from an aluminum foil-coated polyethylene sponge sheet, it prevents the heating of the continuously cooling wall from the outside and emits 25-30% more heat into the room.

!!! Heating Core Backing Foil Polyethylene Thermal Insulation Board Honeycomb Backing Insulation Board are flexible sheets made of polyethylene sponge with a thickness of 3 mm and a size of 50 cm x 100 cm, one side of which is covered with reflective aluminum foil.

Panel Radiator Thermal Insulation Board is compatible with all honeycomb types, it is sufficient to have a gap of 4 - 5 mm between the combi natural gas radiator and the wall.

The Heat Protective Insulation Board behind the Radiator Stove can be cut from the edges without the need for professionalism and craftsmanship and adjusted according to the radiator honeycomb size.

In longer honeycombs, 2 heat plates can be placed side by side and joined together with aluminum tape.