Evokids Rubber Edge Protector Color: Gray Package Content: 1 Piece Dimensions: Roll length: 2 meters Edge width from the outside: 3.50 cm.

The edge width is 2.3 cm from the inside.

Wall Thickness: 1.2 cm With Evokids Rubber Edge Protector, it is an auxiliary product to prevent injuries that may occur as a result of hitting the edges of many materials such as tables, coffee tables, walls.

Application The surface to be glued must be clean and dry before gluing.

1 piece of 4 meter long 3m double-sided adhesive tape comes out of the package.

Open the tape approximately 10 cm and try to stick it to the outer end of the inner edges so that it is zero.

First, glue the top surface of the place you will glue by making sure that it fits perfectly at about 10 cm intervals.

After gluing the upper surface, you can gluing the side surface in the same way.

After gluing, apply gentle pressure for 8-10 seconds and do not use for an average of 12 hours.

Important Warning: Child safety products are auxiliary safety products, parents should have constant control over their children in case children can open or break these products.

Published by Connect Prof ©