-
Pinosan Parquet Varnish Matte 2.5 Lt Glass Polish PRODUCT FEATURES It is a urethane alkyd-based, single component, easy-to-apply matte parquet varnish. It is scratch resistant and forms a film resistant to water, detergent and chemical agents. APPLICATION METHOD and dyeable AREA It is used on parquet and all kinds of wooden surfaces. The surface should be cleaned and sanded if necessary. Pinosan Cellulosic Parquet Filler Varnish should be applied in two coats at intervals of 1-2 hours to properly syrupy, dry and clean new parquet surfaces and light sanding should be done after sufficient drying. Ready to apply. No thinning required. Two or three coats are applied with a brush or roller, depending on the absorbency of the surface. It is recommended to wait 5-6 hours between coats and to sand rough. After 24 hours, it completes its hard drying and gains its physical and chemical durability within 3-4 days. Dependent on surface on two layers
-
6-7 m² surface is coated with 0.75 L. * * 2.5 L and 20-23 m² surface are coated. * * * 15 L and 120-138 m² surface are coated. * * * * 12 kg and 65- 98 m² surface are coated.



