-
Product description: Acrylic copolymer is an emulsion-based, matte-looking, decorative inner surface plastic paint.
-
features: Fawori interior plastic paint combines economy and quality. It has a matte and smooth appearance. It has a water-lifting structure and high breathing feature. It adheres perfectly to surfaces and does not crack, blister or spill when applied in accordance with building material standards. Since it is water-based, it does not have an unpleasant smell, it is environmentally friendly.
-
surfaces TO BE applied: Fawori interior plastic paint, interior old-Newly painted /plastered ceiling- It is applied after the appropriate priming process is completed on wall, plaster, putty, drywall, concrete, osb, glass textile surfaces.
-
application: The surfaces to be applied must be smooth, solid, and capable of carrying the primer and top coat paint. The surfaces to be painted should be cleaned from all kinds of dirt, dust, mold oil, loose layers and necessary surface correction procedures should be carried out. Set times must be observed on concrete, exposed concrete and newly plastered surfaces (28 days). Old painted water- It should not be forgotten to lightly sand all surfaces before starting primer application on solvent-based surfaces. Fawori interior facade transformation primer should be used on newly plastered interior surfaces to be applied for the first time. Fawori transparent primer should be applied as a single layer on absorbent and dusty surfaces such as gypsum, lime, whitewash, gas concrete in a way that it does not form a glassy film layer on the surface without scanning and polishing. Direct application should not be made on lime. After applying 1 coat of stain covering paint to increase the coverage of the paint on very dirty surfaces, the top coat paint should be applied in one or two coats. During the application and until the complete drying of the products is completed, it should be ensured that the ambient and surface temperature is between +5°c and +30°c, and the surfaces should be protected from frost. It can be applied with brush, roller and spray.
-
thinning: It is recommended to apply in two layers by thinning 20% with clean water in brushes and roller applications. In airless spraying, a single coat can be applied provided that sufficient film thickness is provided by thinning 10-15% with clean water.
-
Consumption: Depending on the type, absorbency and structure of the surface to be applied, 7-11 m 2 area can be painted on a single layer with 1 kilogram. Controlled sample study should be performed for precise consumption.







