MINISAN ELECTRIC water HEATER WATER HEATER TECHNICAL SPECIFICATIONS works with 220-230 Volt city environment

7.5 KW power

Operates with normal city water pressure

Provides 300-800 hot water instantly and continuously

It is automatic, it does not work until the water is turned on or a sufficient amount of water comes.

The water pressure automatically turns off when it drops.

It is specially designed and a second safety is provided by the plastic body.

Therefore, there is absolutely no danger of electrical leakage.

USE First turn on the water and then turn the switch on the heater to | - ||-|||.

When you are done, turn the switch to the cold position first, on the contrary.

Then turn off the water.

Leave the switch switch in the cold position when not in use.

In bathroom type devices, open the strainer at the end of the spiral hose once in 15 days and remove the blockages in the holes.

ELECTRICAL INSTALLATION 3x2.5 antigron cable should be used in the assembly of the product.

The connections have to be installed in the phase-neutral-earth place written on the terminal block on the device.

32 ampere fuse should be used in the connection of the device.