Liquid marble is a two-component, low viscosity, solvent-free, self-propagating, multi-purpose interior countertop and floor covering that provides a unique decorative image.

Easy to apply, provides a glossy marble-like surface, waterproof and hygienic, easy to clean.

resistant to mechanical loads, abrasion and chemicals.

Solvent-free and odorless.

Suitable for all indoor uses in showrooms, offices, houses, mall common areas, stores, all kinds of ceramics, concrete, marble, mosaic, steel surfaces, laboratories, food, chemistry and industry.

Beforehand, the surface is cleaned, pits, cracks, etc.

if there are problems, Demafillar is filled with sealant and waited for 24 hours.

The smoother and cleaner your floor is, the better your results will be.

The primer is applied, you can apply the primer with a roller.

Liquid marble is applied 6 hours after primer application.

A black pattern is given on the liquid marble calacatta color.

Liquid marble a component is mixed homogeneously in itself, then b component is poured into a component and mixed for 5 minutes.

Correct mixing of the two components is very important.

The mixture ratio in liquid marble calacatta is 4:1.

For example, when you buy 1 kg of product, 800 g of component and 200 g of component are sent and when you mix, you get 1 kg of product.

After mixing, you should not keep the product in the box because the liquid marble reacts, you should immediately pour it on the surface to be applied and you should finish the application process within 30-40 minutes.

If you will not use all of them, you can mix them by weighing them in a separate container at the rate we have specified.

Do not forget that incomplete or excessive mixing will cause it not to dry.

(eg: If you are adding ingredients to 100 g, you should add 50 g b of ingredients * *) After the liquid marble spreading process is completed, you can pour the pattern we sent on the surface as you want and give the pattern.

In order to be natural, we recommend that you drip some patterns into the liquid marble box and pour them on the surface.

The patterning process is carried out before the surface dries.

You can watch the pattern making videos on our social media account.

If you want to give an extra pattern, you can give a pattern with a blow dryer.

Immediately after the process is finished, you can spray the surface regulator spray we sent with all the places with bubbles and bubbles.

This spray will make the surface as bright as glass.

Finally, you need to let it dry for 24 hours.

We recommend waiting 48 hours to place items.

White etc.

Liquid glass is required in color liquid marble applications.

Applied after 48 hours.