Matte wet sand, which draws attention with its modern design, gives your spaces a stylish look.

With its large capacity of 20 liters, it offers long-term use

provides a practical solution that does not require frequent replacement.

This product, which does not have a wipeable feature thanks to its non-glare surface, creates a hygienic environment by facilitating cleaning.

It can be used safely as it does not contain dangerous substances

can be easily preferred in any area of your home.

Its neutral tone with beige color offers a harmonious aesthetic with different color palettes and adds an elegant touch to your decoration.

This product produced by Marshall Boya ve Varnish Industry Inc. has been prepared in accordance with quality standards.

The application surfaces have to be dry, dust-free, clean and smooth.

Plaster, putty, priming, etc.

all kinds of interior surfaces with completed sub-surface processes are used as topcoats on the walls.

Thin 1 layer of SATIN GYPSUM PRIMER and INSULATION PRIMER 1/7 should be used before FITTING PLASTIC MATTE paint on new surfaces with putty or GYPSUM paste.

1 layer of TRANSITION primer or fit COVERING PRIMER should be applied before FİT PLASTIC MATTE paint on old painted surfaces that were previously painted with a water or solvent-based paint, contaminated or wanted to be discolored for decorative purposes.

24 hours after primer coat applications, at least 2 coats should be applied according to the FİT PLASTIC MATTE surface condition.

The waiting time between floors is a minimum of 2 hours.