Roca l20 kitchen sink faucet chrome a5a3b09c00 before installation: • Check the manual before installing your fixture in its place.

keep your manual for the warranty period of your armature.

keep your fixture in its original packaging until it is installed.

if the mains pressure is above 5 bar, working at this pressure for a long time will shorten the life of your fixture.

Therefore, use e.C.A pressure reduction regulator to the installation inlet.

Install an e.C.A filter at the inlet of the installation where you will connect your armature.

clean the inside of the pipes by draining some water before connecting your armature to the installation.

Use intermediate faucet with e.C.A filter to connect sink and sink faucets to the installation.

chrome plated fixtures for hot springs etc.

Do not use on the floor.

do not leave your armature attached for a long time in buildings under construction.

Construction mortar, lime, etc.

Materials can be poured on the armature.

In addition, chemicals in the air may combine with the humidity of the air and cause deterioration on the luminaire surface.

If such materials fall on the armature during construction and stick to it, do not scrape them using hard objects.

If the luminaire will stay in the buildings under construction for a long time, put a bag on the luminaire and isolate it from the environment.

your armature is designed to operate between ambient temperature 5°c and 65°c.

Take the necessary precautions to prevent your armature from being affected by frost, especially in environmental conditions below 5°c.

during installation: • during the installation of your armature, do not touch the surfaces of your armature with the key, especially the pipe key.

use the installation template during the installation of the pipelines in order to make the installation of the bathroom, sink and sink faucets on the wall easy and smooth.

Never use a key when mounting the flexible connection hoses of the sink and sink faucets to the body.

the sealing element (o-Ring) at the end of the hoses entering the body is sufficient for sealing.

Make sure that the hoses are properly mounted on the body.

After connecting your armatures to the installation, open the valve and observe whether there is a leakage at the connection points of the armature.

If there is a leakage atthe connection points, make a proper arrangement to seal the connection.

Do not use the luminaire without checking for leakage.

during use: • wiping your armature with a soapy cloth and drying with a dry cloth is sufficient for cleaning.

In places where water hardness is high, you can prevent gray spots on the surface by wiping the luminaire surface more frequently.

Do not use a face containing abrasive and hard materials, green sponges or dishwashing strands, acid-containing cleaning agents to clean the armature surfaces.

wipe your fixtures once every six months or with a soft cloth when necessary.

in case of failures that may arise from all kinds of environmental conditions and usage errors, use original e.C.A. spare parts in order not to deteriorate the product feature.