-
LIQUID GLASS, which is a new generation of one-component and water-based preservatives with excellent adhesion to all surfaces, is used for protection purposes.
-
SURFACES TO BE APPLIED: This product can be used after LIQUID GLASS application, especially in wall tiles, furniture and low-traffic areas.
-
However, it is not recommended to apply to surfaces such as floors exposed to heavy use, kitchen countertops and parquet.
-
FEATURES: It has excellent water resistance and therefore provides waterproofing on the surface where it is applied.
-
In addition, it has high chemical resistance (soap, cleaning detergent, diluted bleach, etc.
-
Since it is very good to spread, it does not leave any brush and roller marks, and allows the user the necessary correction time.
-
It also has high adhesion strength and does not retain dirt and stains
-
easily cleaned with a wet and soapy cloth.
-
The product is resistant to scratches, dries quickly and has no unpleasant smell.
-
APPLICATION: It has to be ensured that the surface to be applied is clean.
-
The surface has to be cleaned from all factors that may reduce adhesion to the surface such as dust, dirt, oil and sanding has to be done when necessary.
-
The product must be thoroughly mixed before use.
-
It is applied to the pre-prepared surface in 2 coats with silk brush, velvet varnish roll or spray without thinning the product. It should be waited for at least 4 hours between coats. During the application, care should be taken to ensure that the application surface and ambient temperature are between +5°C and +30°C.
-
Thinning (By Volume): Ready to use.
-
Drying Time (20°C): Touch Drying takes 1-2 hours, while final drying takes 24 hours.
-
Applied surfaces should not be used for 1 day and surfaces exposed to water should not be used for 2 days.
-
Water should not be allowed to accumulate during the first 7 days and should be protected against impacts.
-
AREA: Depending on the application method and floor with 1 liter, 16-18 m² area can be painted with double layer application.
-
STORAGE: The unopened product can be stored in its original packaging at room temperature for 2 years.
-
PACKAGING: 500 ml.
-
WARNINGS: Protective goggles should be used during the painting process and in case of contact with the eyes, the eyes should be washed with plenty of water and a doctor should be consulted immediately.
-
It has to be ensured that the area where the painting and drying process is located is well ventilated, the paint box has to be kept closed and kept out of the reach of children.
-
In addition, it is important to protect the paint from frost and excessive temperature.
-
The remaining paint should not be poured into the sink or toilet and the brush and roller should be cleaned with water after each application.
-
Finally, the paint can must be safely transported and stored upright.



