It is a single component.

the air should be dry.

It is an anticorrosive epoxy primer paint based on modified resin, which ensures that the topcoat paint to be applied on aluminum and similar nonmetals adheres to the surface.

It is also used to increase corrosion resistance on all kinds of metal and wooden surfaces.

The paste is used to ensure that the paste adheres to the surface before application.

It has a structure that can be applied to all metal sheet surfaces.

can be used in any area where moisture and corrosion resistance is needed.

For instance:

preferred for use in trucks, minibuses, buses, tractors and trailers and in the motor industry.

In the production of filling and repair mortar, it is common to use it on steel surfaces as a primer under epoxy/polyurethane floor coverings, as a primer under polyurethane insulation systems, in order to eliminate risks on moist and wet concrete surfaces.

It is highly resistant to the negativities such as calcification and rusting caused by the abrasion of the surface due to various reasons.

It is a type of chemical that has very good resistance to water, acid and alkali and does not lose anything from this resistance property over time and has an adhesive property.

During the application, it has to be ensured that the air and surface temperature is between + 5° c and + 30°.

It covers an area of 4-6 m2 with 1 kg.

(in single coat application) It can be applied with brush, roller, spray.

thinning can be done with demarine epoxy/cellulosic thinner.