AREAS OF USE

pipes

WATER INSTALLATIONS

Rebates

ROOFS

Terraces

BUILDING EXTERIORS

JOINT SPACING

WINDOW/DOOR SURROUNDS

Cars

Boats

APPLICABLE SURFACES

Metal

ALUMINIUM

wooden

PVC

Undercoat

Asphalt

concrete

Bricks

PLASTER GALVANIZED METAL

ROOFING MATERIALS

FIBERGLASS

IMPLEMENTATION

Shake for 1 minute.

Test on a piece of cardboard before proceeding with the application to feel and grasp the spray pattern.

Spray at a distance of 15 cm to 45 cm from the surface.

Using a sweeping motion, spray evenly on the surface.

It is recommended to apply in two coats.

After a light first coat application, 15 – 30 minutes before the second coat application.

Allow the first layer to dry until.

You can apply the second layer thicker.

Bubbles can be seen on the first coat application, but they disappear as they dry up.

For good results, apply at ambient temperatures above 15°C.

Cures within 2 hours, takes 24 hours to fully dry.

We can make splashes during spraying, we recommend wearing gloves and work aprons to prevent splashes on your hands or clothes.

It can drip on the floor in vertical applications, we recommend laying a cover or piece of cardboard to protect the floors.

If there are areas you want to protect around the area to be applied, it is recommended to use paper tape.