SURFACES TO BE APPLIED

It can be applied to all kinds of surfaces such as wood, furniture, parquet, laminate, ceramic, porcelain, tile, marble, glass, plastic, metal, aluminum, galvanized, zinc, stone, wall, paper.

PROPERTIES • ITS covering is very high.

It has excellent water resistance, so it also provides waterproofing on the surface where it is applied.

It has high chemical resistance (soap, cleaning detergent, diluted bleach, etc.).

Since it is very good to spread, it does not leave any brush and roller marks, and gives the user the desired time for the necessary corrections.

Thanks to the bright appearance it leaves after application, it does not require an additional varnish application.

It has high adhesive strength, it does not require any primer.

Dirt and stain resistant, it is cleaned very easily with a wet and soapy cloth.

Perfumed, no unpleasant odour.

Since it has high resistance to water and chemicals, it does not require additional protective varnish application (except in places where contact with water is high and on the floor).

Suitable for use in all indoor and outdoor spaces.

APPLICATION THE APPLICATION surface must be clean.

The surface has to be free from all factors that will reduce the adhesion of the paint to the surface such as all dust, dirt, oil and silicone, and sanding has to be done when necessary.

It does not require the use of any primer before application.

It is recommended to prime the surface with Bianca Antirust to prevent corrosion on metal surfaces.

After opening the Bianca Stella package, it is mixed until a homogeneous consistency is obtained.

Applied in 2 coats to the surface with the necessary preparation, without thinning the product, with a silk brush, velvet roller or spray.

Min. between floors.

It should be waited for 2 hours.

During the application, care has to be taken to ensure that the applied surface and ambient temperature is between +5°C and +30°C.