-
PINOSAN Parquet Varnish DEFINITION: Urethane is an alkyd-based, single component, easy-to-apply parquet varnish.
-
FEATURES: Pinosan Parquet Varnish, scratch resistant
-
forms a film resistant to water, detergent and chemical agents.
-
APPLICATION AREA: It is used to protect parquet and all kinds of wooden surfaces from chemical and physical factors.
-
METHOD OF APPLICATION: Surface Preparation: • The surface must be free of dust, dry and clean.
-
Before applying to old varnished surfaces, syrup must be applied until it reaches the raw wood.
-
After cleaning, sanding powders can be wiped thoroughly and applied.
-
Pinosan Cellulosic Parquet Filling Varnish (956-9001) should be applied in two coats at 1-2 hour intervals to properly syrupy, dry and clean new parquet surfaces and light sanding should be done after sufficient drying.
-
Application: • Ready to use.
-
Two or three coats are applied with a brush or roller depending on the absorbency of the surface.
-
It is recommended to wait 5-6 hours between coats and to sand rough.
-
After 24 hours, it completes its hard drying and gains its physical and chemical resistance within 3-4 days.
-
Cleaning of brushes and tools after application can be done with Dyo Synthetic Thinner.
-
APPLICABLE AREA: It can cover an area of 17-18 m² with 1 L on a single floor.
-
6-7 m² surface is coated with 0.75 L.
-
20-23 m² surface is coated with 2.5 L.
-
15 L and 120-138 m² surface are coated.



