DİATOM Bath Mat Water Absorbent Non-Wet Ablution Mat This product, which has a Super Absorbent Feature, absorbs all the water and traps it in maximum 1 minute after the water falls on it or is stepped on with wet feet, never releases the water outside so that the foot of the person who will use the mat after you will never get wet.

MAT SINGLE SIZE : 39*60 9MM THICK

Diatompaspas IS NOT a CLASSIC TEXTILE mat.

Diatompaspas is a mat designed to take advantage of the high absorbency of diatomite soil.

It is produced to be the definitive solution to the wetness in front of the Bathroom, Shower Cabin, Bathtub and Washbasin.

Its structure cannot be bent or bent, it does not break easily, its texture can be called wood parquet hardness.

Your foot will definitely not slip on the diatompaspas.

Thanks to the super absorbent diatomaceous earth, you feel the water on your feet being absorbed from under your feet.

You will not need to use the foot towel that you have to change and wash frequently from the moment you use the diatomaceous iron.

If you are in front of the sink and shower cabin, you will find the definitive solution to wetness.

It will now end the frequent wetness in the houses where ablution is performed, especially in the sinks.

The use of Diatompaspas in Europe and America is increasing rapidly in the Far East (countries such as Japan, Korea, Malaysia).

The natural diatom bath mat is perfectly absorbent due to its small and permeable pores.

Compared to traditional foot towels and mats, *Exceptionally absorbent,

It dries quickly, * does not smell, * does not burn, easy to clean, * is hygienic. *Antibacterial. * No mold

D I ATOM mat USER MANUAL ·

When you open the product, dust it with a damp cloth.

Use on a flat surface.

Protect from hard falls.

Protect from colored liquids other than water. Otherwise, it may stain.

Ventilate vertically at certain times depending on the frequency of use.

Do not wear shoes when stepping on the mat.

Do not leave the mat in direct sunlight for a long time.

When you notice that the absorbency of the product decreases, sand the surface with sandpaper.

In this way, the pores closed on the product surface will be reopened.

The product can be cleaned with foamy water and cloth, but it should be rinsed well and defoamed.

Drying of foam or soap on the surface creates a layer on the surface and clogs the pores, which causes the absorbency of the product to be lost. In such a case, clean the surface with sandpaper. The product will return to its previous state.

Depending on the frequency of use of the product, it can be used for a minimum of 1 year.

As long as the surface is cleaned with sandpaper, it can be used for a longer life.

NOTE: The product makes a peculiar odor due to the fact that it is new in the first use. However, this will disappear after a few days of use.