Paint that paints everything Sierra paint is a new generation of modifier-based conversion paint with excellent adhesion to all surfaces.

It can be applied to all kinds of surfaces such as wood, furniture, parquet, laminate, ceramic, porcelain, tile, marble, glass, plastic, metal, aluminum, galvanized, zinc, stone, wall, paper.

Its coverage is very high and has excellent water resistance, so it also provides waterproofing on the surface where it is applied.

It has high chemical resistance (soap, cleaning detergent, diluted bleach, etc.).

Since it is very good to spread, it does not leave any brush and roll marks, and the user is asked for the necessary corrections.

It does not require any additional varnish application thanks to the glossy appearance it leaves after application.

It has high adhesive strength, it does not require any kind of resistance.

Dirt and stain resistant, very comfortable with wet and soapy cloth.

Since it has high resistance to water and chemicals, it does not require additional protective varnish application (except in places where contact with water is high and on the floor).

Suitable for use in all indoor and outdoor spaces.

It has UV resistance.

It has three quality certificates.

The surface to be applied must be clean. The surface must be free from all factors that will reduce the adhesion of the paint to the surface such as all dust, dirt, oil and silicone, and sanding must be done when necessary. It does not require the use of any primer before application.

After opening the Demarin Sierra pallet, it is mixed until a homogeneous consistency is obtained. It is applied to the required pre-prepared surface in 2 layers without thinning the product, with silk brush, velvet varnish roll or spray.

Min. between floors.

5 hours have to be waited.

During the application, care has to be taken to ensure that the applied surface and ambient temperature is between +5°C and +30°C.