1. Pull the plastic inner cylinder and pour water into the silicone container a little more than 2 grids, not more than 2 and a half grids. 2. Slowly insert the inner cylinder into the silicone cavity with the cover, taking care to rotate it downwards and keep it pressed, and then gently squeeze the silicone side under the cover to make the inner cylinder float from the inner cylinder 3. Put the molds at room temperature for a few minutes

If you do not want to wait and press hard, you can pour the appropriate amount of hot water into the inner cylinder. Pour hot water for about 10 seconds and then easily pull the inner cylinder) 4. Press the outer wall of the silicone to continuously adjust the angle to remove the ice cubes Not only are 1.3cm ice cubes of the right size - suitable for cold drinks quickly, but also guarantee ice time of about 10 minutes, very large ice cubes gradually cool the drinks, very broken smoothies will melt in a minute or two. Not durable enough Easy to get ice - press ice cylinder gently -ice cubes fall off and easy to use Simple water injection- pour half of the water directly into the cup and the water injection is completed in 3 seconds, saving time. Easy to use - the seal is stable and not easy to leak. Space saving-small and round shape, easy to place. No need for additional storage - after pressing ice cubes, you can pour it directly into the water glass and enjoy it easily Just the right size of 1.3cm ice cubes - suita Color: Mixed