MS 80 - Transparent Water Impermeability Liquid MS 80 TRANSPARENT water IMPERMEABILITY LIQUID is a siloxane-based transparent insulation product that makes it water impermeable by preserving its naturalness without creating a film layer on the absorbent surfaces on the exterior facades where it is applied.

Since it does not form a film layer on the surface, it does not prevent, reduce or disrupt the breathing capacity of the building or stone.

Does not tarnish or emboss.

Alkali resistance is very high and therefore it can be easily applied in new or old concretes.

Prevents salt vomiting and staining caused by the mortar of press bricks, natural, artificial stones or plasters.

It prevents the heat insulation value of the buildings from being lost because it prevents wetness.

Protects the building from the destruction and corrosion of rain.

Extends the life of structures.

FEATURES · · It is transparent, does not form a film layer, does not spoil the natural image, does not give a bright image like varnish.

Works in depth, has high penetration feature.

It has high alkali resistance.

It does not prevent the structures from breathing.

It is long-lasting and economical.

Prevents contamination,darkening,and discoloration caused by rain.

Protects from frost damage and salt vomiting.

TECHNICAL SPECIFICATIONS · pH(25°C): Not applicable (N/A) · Density (25°C, g/mL) : 0.75 ± 0.10 · Viscosity (25°C, mPa.

s) : 0 - 500 · Processing Depth (H, mm):? 10 mm, CLASS II · Resistance of hydrophobic impregnation to water absorption and alkali test (H, %): Absorption rate <

7.5, absorption rate <

10 (after immersion in alkaline solution) · Drying rate of hydrophobic impregnation (H, %): >

10, CLASS II · Solvent: Water USAGE AREAS: It is applied to all kinds of mineral-based and absorbent surfaces.

For instance:

Gross concrete, plaster, brick, briquette, travertine, natural stone, mosaic, aerated concrete

tile, etc.

It is not applied only on non-absorbent surfaces such as marble, granite, glass, metal, plastic and horizontal absorbent surfaces.

ISONEM MS 80 is used to protect the outer walls of buildings with unpainted and absorbent surfaces from rain and its effects.

Surface preparation: The application surface should be dry, solid and free from all kinds of dirt, oil and dust.

Wet surfaces should not be applied.

It has to be ensured that the surface is dried.

Layers that will reduce the absorbency of the surface have to be cleaned.

There should be no cracks larger than 1 mm on the surface to be applied, if any, they should be repaired.

Application method: The application should be done in at least two coats from top to bottom with the help of a brush, roller or spray.

Before the first coat application is fully dried, the second coat should be applied over the age and the surface should be fully saturated.

No flammable material should be used during application.

Eye and skin contact has to be avoided, gloves and glasses have to be used.

CONSUMPTION : 100-200 mL/m² depending on the absorbency of the surface.

17.5 - 35 m² / 3.5 L canister.

PACKAGING : 3.5 L canister.

SHELF LIFE : Suitable for use for 24 months from the date of manufacture if stored in original, unopened and undamaged packaging.

STORAGE CONDITIONS : Store in a dry and cool environment away from heat and fire, with the packaging lids tightly closed.