Remege aeroyoga hammock ceiling mounting apparatus ceiling hanger apparatus · 2 stainless steel ceiling/wall apparatus and 8 steel anchors. · mounted only on concrete ceiling, not used in plasterboard and similar suspended ceilings. · Shipped with 2 pcs 8 mm steel clips and 4 steel anchors · color: Black · dimensions: 14 cm x 6 cm · sheet thickness: 3 mm laser cut

Electrostatic oven paint · place the mounting bracket where you decide to install it and mark the hole locations. Drill the places you have marked to the depth that the pipe part of the steel dowels can enter with a drill with a 10 mm concrete tip. Slowly tap the screw end with a hammer into the hole so that the screw nut part is facing downwards as it comes to you without removing the steel dowels nuts. Ensure that the entire pipe part of the dowel enters the hole. Keep the screw part out. After driving the anchor into the hole, unscrew the nuts and washers, insert the hanger holes into the screws, reinstall the washers and nuts, and tighten the nuts thoroughly with the No. 12-13 wrench. As you tighten the nuts, the steel anchor will be opened inside due to its structure and compression will be provided. If necessary, you can get help from an experienced relative.